Setup mode and settings

Hello!

Ask me any question about Lympik.

Please be as specific as possible so I can help you better.

Answers are AI-generated and may be inaccurate!

You change the settings of the Soundbox with your smartphone or PC.

Open setup mode

  1. Switch on the Soundbox and double-press the power button. The status LED turns blue.
  2. On your phone, connect to the open Wi-Fi network Soundbox-XXXX (XXXX is four letters or numbers, different on every box). No password is needed.
  3. The setup page usually opens by itself. If it doesn't, open your browser and go to http://8.8.4.4
  4. When you are done, press the power button once or tap Restart. If you don't, the box restarts by itself after 10 minutes.
Several Soundboxes in one place? Open setup mode on one box at a time. The box's name (e.g. Soundbox-3F2A) is shown at the top of the setup page, so you can check which box you are connected to.

Settings you save take effect when the box restarts. While setup mode is open, the box does not play on triggers.

Setup page

  • Volume: slider from 40 to 100 (default 80). Tap ▶ to hear a sound at the slider position before you save.
  • Sleep mode: the nightly time window in which the box ignores triggers (see Triggers, sound and sleep mode).
  • Setup WiFi network: up to two networks with internet access, used for software updates.
  • Advanced: the small link at the bottom of the page opens all other settings.
Setup page of the Soundbox 2026 with volume, sleep mode and Wi-Fi settings

Advanced page

The top of the page shows the box's name, software version, battery voltage, date and time, the trigger counter (Code) and the last error (Error reason), with the buttons Set date, Restart and Update. Below you find:

  • Storage and Manage files (sounds)
  • Config: trigger, vibration trigger, sound, light and sleep mode
  • Save configuration and Play test sound
  • Setup WiFi network and Factory reset
Top of the Advanced page with software version, battery, date, Code and the Set date, Restart and Update buttons

Date and time

The Soundbox takes the time from your phone as soon as the setup page opens. There is nothing to press. Your phone must show the correct time. The clock is needed for sleep mode. Set date on the Advanced page does the same by hand.