Operation of the device and important notes

Hello!

Ask me any question about Lympik.

Please be as specific as possible so I can help you better.

Answers are AI-generated and may be inaccurate!

The Soundbox 2026 plays a sound and switches a light every time it is triggered. Its built-in vibration sensor detects when a rider hits the feature, so no separate sensor is needed. External sensors can still be connected to the wired inputs.

To switch on the Soundbox, press the power button (1). The status LED (6) and the battery LED (7) briefly light up white while the box starts.

Soundbox with its numbered parts

Power button

  • Single press: shows the battery level on the battery LED for 1 second.
  • Double press: opens setup mode. The status LED turns blue.
  • Hold for 2 seconds: switches the box off. Both LEDs flash white.
  • Single press in setup mode: leaves setup mode and restarts the box.

Battery LED

  • Green: battery is good.
  • Yellow: battery is getting low.
  • Red: battery is low, charge it soon.
  • Red, then the box switches off: battery is empty. The box shuts down to protect the battery.

Status LED

  • Green: a sound is playing.
  • Red for 1 second after a trigger: there are no sounds on the box. Upload some (see Sounds: upload and manage files).
  • Blue: setup mode is open.
  • Cyan: software update in progress. Green or red afterwards means the update succeeded or failed; the box then restarts after 5 seconds.
  • Yellow, 5 quick blinks at power-on: the clock lost its time. Open setup mode once to set it again.
  • Magenta, 3 quick blinks at power-on: the vibration sensor was not found. The wired inputs still work. Please contact your dealer.
  • Red, steady: error during start. Press the power button once to restart.